直接投菌法在城市重污染河流治理中的应用研究

在无截污和清除内源的情况下,对深圳市甘坑河采用梅花式接种法将本源微生物菌剂分两次直接接入河流水体及底泥中。结果表明,第1次接种后的4 d内各项水质指标都不稳定,4 d后,悬浮物、COD、TP和NH3-N等浓度下降,水质明显改善;但从第8天开始,COD、NH3-N和TP的去除率同时下降,本源微生物的处理效率开始降低,需进行第2次接种;第2次接种后,DO浓度提升至2.0 mg/L以上,COD、TP和NH3-N的去除率分别保持在40%、30%和40%以上。结果表明,直接投菌法在城市重污染河道治理中可以初步消除河道的黑臭现象,修复水质。     

Distribution of polybrominated diphenyl ethers in breast milk,cord blood and placentas: a systematic review

Polybrominated diphenyl ethers (PBDEs) have been extensively used as flame retardants in consumer products. PBDEs rapidly bioaccumulate in the environment, food, wild animals and humans. In this review, we investigated the harmful effects of PBDEs on humans, especially in early life, and summarised the levels of PBDEs in human biological samples (breast milk, cord blood and placentas). In addition, we described the spatiotemporal distribution of PBDEs in this review. PBDE levels in breast milk, cord blood and placentas were generally higher in North America than in other regions, such as Asia, Europe, Oceania and Africa. However, high levels of PBDEs in human biological samples were detected at e-waste recycling sites in South China, East China and South Korea. This finding suggests that newborns living in e-waste regions are exposed to high levels of PBDEs during prenatal and postnatal periods. The time trends of PBDE concentration differed according to the region. Few studies have investigated PBDE levels in humans from 1967 to 2000, but they increased rapidly after 2000. PBDE concentration peaked at approximately 2006 globally. Compared with other PBDE congeners, BDE-47, BDE-153 and BDE-209 were the major components, but the detection rate of BDE-209 was lower than those of others. Future studies should focus on determining the BDE-209 concentration, which requires the implementation of different analytical approaches. Additionally, the levels of PBDEs in human samples and the environment should be monitored, especially in e-waste recycling regions.

Open image in new window

Graphical abstract The figures described the spatial distribution of the lowest (Fig. a1) and highest concentration of ∑PBDE (Fig. a2) in different countries by 2006 and described the spatial distribution of the lowest (Fig. b1) and highest concentration of ∑PBDE (Fig. b2) in different countries from 2007 to 2015. All the figures indicated that the levels of PBDEs in North America were substantially higher than those in many regions of Europe, Asia, Oceania, or Africa. Comparing Fig. a1–b1 or Fig. a2–b2, increasing trends were observed in some countries, especially in some regions in China, Korea and Canada.

     

CFD simulation of MSW combustion and SNCR in a commercial incinerator

A CFD scheme was presented for modeling municipal solid waste (MSW) combustion in a moving-grate incinerator, including the in-bed burning of solid wastes, the out-of-bed burnout of gaseous volatiles, and the selective non-catalytic reduction (SNCR) process between urea (CO(NH₂)₂) and NO_x. The in-bed calculations provided 2-D profiles of the gas–solid temperatures and the gas species concentrations along the bed length, which were then used as inlet conditions for the out-of-bed computations. The over-bed simulations provided the profiles of incident radiation heat flux on the top of bed. A 3-dimensional benchmark simulation was conducted with a 750 t/day commercial incinerator using the present coupling scheme incorporating with a reduced SNCR reduction mechanism. Numerical tests were performed to investigate the effects of operating parameters such as injection position, injection speed and the normalized stoichiometric ratio (NSR) on the SNCR performance. The simulation results showed that the distributions of gas velocity, temperature and NO_x concentration were highly non-uniform, which made the injection position one of the most sensitive operating parameters influencing the SNCR performance of moving grate incinerators. The simulation results also showed that multi-layer injections were needed to meet the EU2000 standard, and a NSR 1.5 was suggested as a compromise of a satisfactory NO_x reduction and reasonable NH₃ slip rates. This work provided useful guides to the design and operation of SNCR process in moving-grate incinerators.     

Sand as a relevant fraction in geochemical studies in intertidal environments

Soil and sediment samples from several intertidal environment exposed to different types of contamination were studied to investigate the importance of grain size in relation to the capacity of the substrates to retain trace metals. The unfractionated samples (referred to as bulk samples) were separated into the following grain/size fractions: fine–coarse sand (2?0.100 mm), very fine sand (0.100?0.050 mm), silt (0.050?0.002 mm), and clay (0.002 mm). The sample into its fractions was carried out was in a glove box under high-purity N₂ atmosphere in order to minimize any alterations to the samples. The bulk samples were characterized in terms of physicochemical properties such as pH, redox potential, and grain size. The total organic carbon (TOC), total sulfur (S), iron (Fe) pyrite, Fe, and manganese (Mn), and trace metals lead (Pb), mercury (Hg), chromium (Cr), and nickel (Ni) were analyzed in the bulk samples and in each fraction. The sand fractions were also examined by scanning electron microscopy (SEM). Comparisons of the above parameters were made between fractions and between each fraction and the corresponding bulk sample. The fine–coarse sand fraction contained high levels of the primary elements of the geochemical processes that occur in marine sedimentary environments such as TOC, total Fe, Mn, and S. The net concentrations of these four elements were higher in the fine-coarse sand fraction than in the very fine sand fraction and were similar to the net concentrations in the silt and clay fractions. Detailed SEM analysis of the sand coarse fraction revealed the presence of Fe and aluminum oxyhydroxide coatings in the oxic layers, whereas the framboidal pyrites and coatings observed in the anoxic layers were Fe sulfides. The presence of the various coatings explains why the trace metal concentrations in the sand fine–coarse fraction were similar to those in the clay fraction and higher than those in the very fine sand fraction. The present results highlight the importance of the sand fraction, which is generally disregarded in geochemical and environmental studies of sedimentary layers.     

Effects of taxonomy,sediment, and water column on C:N:P stoichiometry of submerged macrophytes in Yangtze floodplain shallow lakes,China

Carbon (C), nitrogen (N) and phosphorus (P) are the three most important essential elements limiting growth of primary producers. Submerged macrophytes generally absorb nutrients from sediments by root uptake. However, the C:N:P stoichiometric signatures of plant tissue are affected by many additional factors such as taxonomy, nutrient availability, and light availability. We first revealed the relative importance of taxonomy, sediment, and water column on plant C:N:P stoichiometry using variance partitioning based on partial redundancy analyses. Results showed that taxonomy was the most important factor in determining C:N:P stoichiometry, then the water column and finally the sediment. In this study, a significant positive relationship was found between community C concentration and macrophyte community biomass, indicating that the local low C availability in macrophytes probably was the main reason why submerged macrophytes declined in Yangtze floodplain shallow lakes. Based on our study, it is suggested that submerged macrophytes in Yangtze floodplain shallow lakes are primarily limited by low light levels rather than nutrient availability.

     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

含中间层的DSA电极电催化氧化硝基苯废水的研究

为了提高难降解有机废水的可生化性，以及更高效地去除废水中的特征污染物，同时避免二次污染，利用自制的含锡锑中间层的钌钯氧化物涂层电极对有机废水中的硝基苯进行处理，并利用SEM、XRD等方法对电极中间层、表层进行微观表征。微观测试表明，基体、中间层、表层之间结合力较强，有利于增强电极寿命；水处理实验表明，电催化氧化反应体系适合高浓度有机废水的处理，由于该反应体系需要外加电解质加强传质，这在实际运用中为废水中盐度的处理提供了一种新的途径，当电流密度为20 mA/cm²、电解质浓度为10 g/L、pH=5、极板间距=2 cm时，电催化氧化体系对硝基苯具有较高的去除效率。     

垃圾填埋场微生物气溶胶粒径分布研究

为了了解垃圾填埋场微生物气溶胶粒径分布规律,在北京市某垃圾卫生填埋场填埋区、渗滤液处理区、生活区分别选定监测点,利用安德森六级微生物采样器,对填埋场空气微生物进行了系统的定点取样、测定和分析。研究结果表明，空气细菌粒径分布均为第Ⅰ级(>8.2 μm)最高,填埋区空气细菌粒径呈偏态分布,渗滤液处理区、生活区分别在第Ⅳ级和第Ⅲ级出现第2个峰值。携带细菌的可吸入微粒在渗滤液处理区比例最大。空气真菌与放线菌均在第Ⅳ级分布最高,携带真菌和放线菌的可吸入粒子的比例显著大于细菌(P<0.05)。填埋区不同作业时段空气微生物粒径在各级分布比例基本一致。填埋区细菌气溶胶中值直径为5.7 μm,渗滤液处理区为3.7 μm,生活区为5.3 μm，显著大于真菌气溶胶和放线菌气溶胶的中值直径(P<0.05)。     

Concentrations and distributions of 18 organochlorine pesticides listed in the Stockholm Convention in surface sediments from the Liaohe River basin,China

Organochlorine pesticides (OCPs) were analyzed in 26 surface sediment samples from the Liaohe River basin, and the distributions of and potential environmental risks posed by OCPs in the basin were evaluated. Eighteen OCPs listed in the Stockholm Convention were determined using isotope-dilution gas chromatography–high resolution mass spectrometry. This is the first study of hexachlorobenzene (HCB) in the Liaohe River basin sediments. The total OCP concentrations were 0.39–68.06 ng g^?1 dry weight. The total α-, β-, γ-, and δ-hexachlorocyclohexane (HCH), the total dichlorodiphenyltrichloroethane (DDT – p,p′-dichlorodiphenyldichloroethane (DDD), p,p′-dichlorodiphenyldichloroethylene (DDE), o,p^'-DDT, and p,p′-DDT), and the HCB concentrations in the sediment samples were 0.1–28.48 ng g^?1 (mean 4.01 ng g^?1), 0.08–6.52 ng g^?1 (mean 3.07 ng g^?1), and 0.18–24.8 ng g^?1 (mean 4.38 ng g^?1), respectively. The HCB concentrations were higher than the concentrations of the other OCPs, and the HCHs and HCB together were the dominant OCPs. β-HCH was the most abundant HCH isomer. The concentrations of DDTs and other OCPs were relatively low, and the (DDE+DDD)/DDT ratios (>0.5) and DDD/DDE ratios (<1) indicated that no recent DDT inputs had occurred in the Liaohe River system. The main sources of HCHs were probably the historical production and agricultural use of HCH in the study area. The DDT and HCH concentrations were generally below or similar to the concentrations that have been found in other parts of the world. An ecotoxicological evaluation indicated that HCHs in surface sediments pose slight risks to human and ecological health in the Liaohe River basin.